Description

Nosler Custom Rifle Brass 6.5 PRC — 500 Cases

The Nosler Custom Rifle Brass 6.5 PRC is unprimed, unloaded cartridge cases — not loaded ammunition. You supply your own primers, powder, and bullets.

At $1.10 per case for 500 cases, the Nosler Custom Rifle Brass 6.5 PRC is premium pre-prepped brass ready to load on first use.

This Is Brass, Not Ammunition

Before ordering: this product ships as empty brass cases. It does not contain primers, powder, or projectiles and cannot be fired as received.

It is intended for reloaders who load their own ammunition. If you need factory-loaded 6.5 PRC rounds, the loaded options in the 6.5 PRC ammunition category are the correct products.

What “Custom Rifle Brass” Means — Nosler’s Own Description

Nosler’s own description of this product states it directly: the cases are sized, trimmed to correct length, case mouth deburred and chamfered, flash holes deburred, weight sorted, polished, and inspected before packaging.

That is the prep work a careful handloader does before first firing — Nosler has done it.

The Nosler Custom Rifle Brass 6.5 PRC is ready to prime, charge, and seat a bullet on first use. No additional prep required.

Nosler vs Lapua Brass — Two Premium Options

You now have two premium brass options for 6.5 PRC in this category. They suit different buyers:

Lapua 6.5 PRC brass — $1.12/case, 500 cases. Lapua is the European precision standard. Harder case heads than almost any other production brass, annealed neck and shoulder, the choice of competitive long-range shooters who prioritise primer pocket longevity above everything else. Slightly more expensive per case.

Nosler Custom Rifle Brass 6.5 PRC — $1.10/case, 500 cases. Nosler’s own brass, pre-prepped and ready to load. Slightly less expensive per case. Well suited to handloaders who already load Nosler bullets (Trophy Grade AmmoLoad uses this same brass) and want brand-integrated consistency.

Choose based on whether Lapua’s case head hardness and primer pocket retention across many firings matters most, or whether the Nosler Custom Rifle Brass 6.5 PRC pre-prepped convenience at a slight cost advantage fits your workflow better.

The 6.5 PRC Case — Why This Cartridge Rewards Reloading

The 6.5 PRC was designed with a longer throat than the 6.5 Creedmoor.

Factory ammunition loads to magazine length. A handloader can seat bullets to the lands of a specific rifle’s throat — a measurable accuracy advantage for precision shooting.

The case capacity also supports slow-burning powders, which tend to be more temperature-stable — useful for hunting ammunition used across a wide temperature range.

What You Need

Primers: Large rifle. Standard or magnum depending on your powder selection — consult published load data.

Powder: A slow-burning rifle powder suited to the 6.5 PRC case capacity. Consult Nosler’s reloading guide, Hodgdon, or Alliant data before loading.

Bullets: Any SAAMI-spec 6.5mm (.264″) projectile. Nosler bullets are the natural pairing with this brass.

Tools: Reloading press, 6.5 PRC dies, primer pocket tool for subsequent reloads. First-time use of this brass requires minimal additional prep — Nosler has done it.

Cartridge specifications are published by SAAMI and by Nosler directly. Safe storage guidance is available from the NSSF.

---

SHORT DESCRIPTION (above Add to Cart)

This product is unprimed, unloaded brass cases — not loaded ammunition. For factory 6.5 PRC rounds, see the 6.5 PRC ammunition category. Nosler Custom Rifle Brass 6.5 PRC, 500 cases. Pre-sized, trimmed to length, mouth deburred and chamfered, flash holes deburred, weight sorted, polished, and inspected. Ready to prime and load on first use. Primers, powder, and bullets sold separately.

---

💬 Before You Go — Handloading 6.5 PRC?

Using Nosler Custom Rifle Brass in your 6.5 PRC loads? Leave a review — specifically how many reloads you’re getting per case and your sizing and annealing cadence. That’s the data a handloader comparing Nosler to Lapua actually needs. And if you came looking for brass we don’t carry, tell us what it was. 🎯

---

Please purchase and use reloading components responsibly and in accordance with all federal, state and local laws. These are unprimed, unloaded cartridge cases — not completed ammunition. Always follow published load data from a reputable reloading manual. Never exceed maximum published charges. Safe storage guidance is available from the NSSF.

Frequently Asked Questions

Is this loaded ammunition? No. These are empty, unprimed brass cases. They cannot be fired as received. You supply primers, powder, and bullets.

Does this brass need prep before first use? No — Nosler has already sized, trimmed, deburred, chamfered, weight sorted, and polished each case. Load directly: prime, charge, seat a bullet.

How does it compare to Lapua 6.5 PRC brass also in this range? Both are 500 cases at comparable cost ($1.10 vs $1.12 per case). Lapua is known for harder case heads and extended primer pocket life across many firings. Nosler Custom Rifle Brass is pre-prepped and integrates naturally with Nosler bullets. Choice depends on your priorities: primer pocket longevity vs ready-to-load convenience.

What primers does 6.5 PRC use? Large rifle. Standard or magnum depending on your powder — consult published load data for your specific combination.

Can I use any 6.5mm bullet? Yes — any SAAMI-spec .264″ projectile. Nosler bullets are the natural pairing but not required.

What’s the per-case cost? $550 / 500 = $1.10 per case.

Why does the spec table say 50 Piece? The spec table was imported from the 50-count retail pack data sheet. This listing is for 500 cases. The spec table needs correcting.

Does Nosler publish load data for 6.5 PRC with this brass? Yes — Nosler’s reloading guide covers the 6.5 PRC. Additional data is available from powder manufacturers’ online tools.