Description

Lapua 6.5mm PRC Unprimed Rifle Brass — 500 Cases

The Lapua 6.5 PRC Brass is unprimed, unloaded cartridge cases — not loaded ammunition. You supply your own primers, powder, and bullets.

At $1.12 per case, the Lapua 6.5 PRC Brass 500-case lot is the premium choice for 6.5 PRC handloaders.

This Is Brass, Not Ammunition

Before ordering: this product ships as empty brass cases. It does not contain primers, powder, or projectiles and cannot be fired as received.

It is intended for reloaders who load their own ammunition. If you need factory-loaded 6.5 PRC ammunition, the other loads in the 6.5 PRC ammunition category are the correct products.

Why Lapua Brass

Lapua is the benchmark for premium reloading brass — case weight, capacity, wall thickness, and neck concentricity.

When handloaders in long-range competition discuss brass, Lapua is the first name in the conversation.

Three features distinguish Lapua 6.5 PRC Brass from generic production brass:

Exceptionally hard case heads. Lapua draws the case head to a higher hardness than standard brass production. Hard heads hold primer pockets tight over many firings — reducing or eliminating primer pocket loosening, which is the most common failure mode in high-round-count cases.

Resilient brass body. The case body extracts cleanly after firing in both full-size and neck-size reloading operations. Work hardening is reduced, extending the case life.

Annealed neck and shoulder. The case neck and shoulder are annealed to remain soft and malleable for consistent bullet grip and seating, while the head stays hard. This is the correct metallurgical approach for long-case-life reloading.

The 6.5 PRC Case — Why This Cartridge Rewards Reloading

The 6.5 PRC was designed for heavy, high-BC bullets in the 140–150 grain range with a longer throat than the 6.5 Creedmoor.

That longer throat is the reason experienced 6.5 PRC shooters reload.

Factory ammunition loads to magazine length. A handloader can seat bullets out closer to the lands for each specific rifle — a measurable accuracy advantage for precision shooting.

The Lapua 6.5 PRC Brass case capacity also supports slower powders, which are typically more temperature-stable — important for hunting loads used in wide temperature ranges.

What You Need to Use This Brass

Primers: Large rifle primers; check your load data for whether standard or magnum is appropriate for your powder selection.

Powder: A slow-burning rifle powder appropriate for the 6.5 PRC case capacity and the bullet weight you’re loading. Consult published load data from Lapua, Hodgdon, or Alliant before loading.

Bullets: Any SAAMI-spec 6.5mm (.264″) projectile appropriate for your twist rate and intended purpose.

Tools: Reloading press, dies, case trimmer, primer pocket tool (for used brass on subsequent reloads). First-time use of new brass typically requires minimal prep.

Reloading data specific to the Lapua 6.5 PRC Brass case is available from Lapua. Cartridge specifications are published by SAAMI and by Lapua directly. Safe storage guidance is available from the NSSF.

---

SHORT DESCRIPTION (above Add to Cart)

This product is unprimed, unloaded brass cases — not loaded ammunition. For factory 6.5 PRC rounds, see the 6.5 PRC ammunition category. Lapua 6.5mm PRC unprimed rifle brass, 500 cases. Hard-drawn case heads, annealed neck and shoulder, resilient brass body. Lapua SKU 4PH6023. Primers, powder, and bullets sold separately.

---

💬 Before You Go — Reloading 6.5 PRC?

Loading with Lapua 6.5 PRC brass? Leave a review — specifically how many reloads you’re getting per case and what load you’re running. That’s the information a handloader deciding between brass brands actually needs. And if you came looking for brass we don’t carry, tell us what it was. 🎯

---

Please purchase and use reloading components responsibly and in accordance with all federal, state and local laws. These are unprimed, unloaded cartridge cases — not completed ammunition. Always follow published load data from a reputable reloading manual. Never exceed maximum published charges. Safe storage guidance is available from the NSSF.

Frequently Asked Questions

Is this loaded ammunition? No. These are empty, unprimed brass cases. They cannot be fired as received. You need to supply primers, powder, and bullets and load them yourself.

Why buy Lapua brass over Federal or Nosler? Lapua is consistently cited by precision shooters for tighter dimensional tolerances — especially case weight uniformity, neck concentricity, and primer pocket hardness under repeated loading. The premium is real and so is the performance difference.

How many reloads should I expect? Varies with load pressure and sizing practice. Neck-sizing only and modest charges can yield 10+ reloads. Full-size loads at maximum pressure will give fewer. The hard case heads and annealed necks specifically extend service life.

Do I need to prep new brass? New Lapua brass typically requires minimal prep — deburr/chamfer the case mouth, check primer pocket depth. Many reloaders use it without further prep for the first firing.

What primers does 6.5 PRC use? Large rifle. Whether standard or magnum depends on the powder — consult published load data for your specific combination.

Does Lapua publish load data for this case? Lapua’s reloading guide covers the 6.5 PRC. Additional data is available from powder manufacturers’ online load data tools.

What is the brass quantity — 100 or 500? 500 cases. The spec table currently shows “100 Piece” — that is a data entry error from a 100-piece listing. This listing is for 500 cases at $560 ($1.12/case).

What is “6,555 SE” mentioned in the existing description? A typographical error in Lapua’s own marketing copy — it should read “6.5×55 SE” (the Scandinavian 6.5x55mm cartridge). It is not a separate cartridge.